BYPCW - 2081 ZINC-IT AEROSOL

  • MSDS: BYPCW
  • Manufacturer: CRC INDUSTRIES INC
  • Product Name: 2081 ZINC-IT AEROSOL
  • National Stock Number: 8030-01-237-6602
Product Identification

Product ID:2081 ZINC-IT AEROSOL
MSDS Date:04/07/1994
FSC:8030
NIIN:01-237-6602
MSDS Number: BYPCW

Responsible Party
CRC INDUSTRIES INC
885 LOUIS DRIVE
WARMINSTER, PA 18974
US

Emergency Phone: 215-674-4300

Info Phone: 215-674-4300

Preparer: IRENE CAMPBELL

Cage: CRCIN

Contractor
CRC INDUSTRIES, INC.
WARMINSTER, PA 18974-2820 US

Telephone: 215-674-4300/800-424-9300

Cage: 10136

Ingredients

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 20-40%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


EPOXY ESTER RESIN

Fraction By Weight: 1-10%


XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-3*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20-40%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PROPANE (DIMETHYLMETHANE) *95-3*

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 10-20%

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ANESTHESIA. EYES:
IRRITATION. SKIN: IRRITATION & DERMATITIS. PRODUCT MAY CAUSE LIVER
& KIDNEY EFFECTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHES, DIZZINESS, NAUSEA,
DRYING.
Medical Cond Aggravated by Exposure:BREATHING PROBLEMS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. EYES:
FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH AREA W/SOAP
& WATER. USE SKIN CREAM. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:<20F
Extinguishing Media:CO2, DRY CHEMCIAL, FOAM.
Unusual Fire/Explosion Hazard:MATERIAL REACTS W/WATER. AEROSOL
CONTAINERS MAY EXPLODE WHEN HEATED >120F.

Accidental Release

Spill Release Procedures:NOT NORMALLY A PROBLEM W/AEROSOLS. VENTILATE
AREA & REMOVE IGNITION SOURCES. PICK UP W/AN ABSORBENT.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA. DUE TO HIGH
DENSITY OF METALLIC ZINC, CAN MUST BE THOROUGHLY AGITATED BEFORE
USE.
Other Precautions:PROPANE SERVES AS PROPELLANT FOR THIS PRODUCT.

Exposure Controls

Respiratory Protection:WEAR SELF CONTAINED BREATHING APPARATUS IF
VAPORS EXCEED TLVS.
Ventilation:MECHANICAL REQUIRED IF SPRAYED IN A CONFINED AREA.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:USUALLY NOT REQUIRED W/AEROSOL PRODUCT USAGE
Supplemental Safety and Health

Chemical Properties

Vapor Pres:50-60 PSIG
Vapor Density:>1
Evaporation Rate & Reference:DRIES IN 20-30 MINS
Appearance and Odor:GRAY, VISCOUS LIQUID W/SOLVENT ODOR.
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, STRONG OXIDIZERS.
Stability Condition to Avoid:TEMPS >120F & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO & CO2.

Disposal

Waste Disposal Methods:ALL USED & UNUSED PRODUCT SHOULD BE DISPOSED OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.